Bryant NON-PROGRAMMABLE THERMOSTAT Bedienerhandbuch PDF herunterladen (Seite 17)

10. Find suitable indoor mounting location for Equipment Control Module,

either near or on equipment. See Fig. 11.

IMPORTANT NOTE: Equipment Control Module should not be mounted

to duct work or below any other controls or equipment (i.e. humidistat,

humidifier, etc.).

A07217

Fig. 11 -- Equipment Control Module on Equipment

11. Route wires through rear of Equipment Control Module using either a

clearance hole o r supplied standoff. See Fig. 12.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 55 56

Keine Kommentare

Bryant NON-PROGRAMMABLE THERMOSTAT Bedienerhandbuch Seite 17