Bryant ASPAS1BBA007 Anleitung zur Fehlerbehebung PDF herunterladen (Seite 19)

OBTAIN PERMITS

1. Visit your local municipal office to

obtain necessary permits for

installation.

FUEL CONNECTION

2. Arrange to have a natural gas or LP

gas fuel connection, complete with

shut-off valve, located within 1' of

generator fuel inlet.

PREPARE LOCATION

3. Clear an area 5-1/2 feet by 5 feet

minimum of grass and vegetation to

a depth of 5 inches. This includes the

distance the generator should be set

away from any structure (3 feet) and

6 inches beyond the width and length

of the generator mounting pad (48" L

x 24" W). NOTE: Local codes may

supercede these requirements.

4. Connect 1' flex fuel line to gas piping

and generator fuel inlet. Check for

leaks with soapy water.

5. Drill a 1-3/4" diameter hole through

exterior wall to inside using hole saw.

6. From the interior of the house, feed

end of 30' conduit from automatic

transfer switch through wall to

outside.

Step-by-step Installation

INSTALLATION

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Keine Kommentare

Bryant ASPAS1BBA007 Anleitung zur Fehlerbehebung Seite 19